Products

Synthetic Fiber Rope

Rope Protector

Seamah rope protector ensures the longest service to your ropes through maximum abrasion protection from all rough and sharp surfaces.
-Help to give longer life to the rope by protecting it from sharp and rough surfaces.
-Extending the service life of rope defines peformance.
-Keeping the rope abrasion resistant significantly increases service life.

01Explanation

Sigma Dura Protector(UHMWPE)/Sigma Protector(Polyester) is for anti-abrasion and UV resistance, so it is recommended for chafe protection to increase service life more by decreasing rope's external and internal abrasion when it's contacted on tough and sharp deck hardware. Free size can be applied after eye-splicing.

For Eye For line
Size Rope Size Size Rope Size
Dia (㎜) Cir (inch) Dia (㎜) Cir (inch)
Small Under 50 Under 6 Small Under 50 Under 6
Medium 50 ~ 70 6 ~ 9 Medium 50 ~ 70 6 ~ 9
Large 70 ~ 80 9 ~ 10 Large 70 ~ 80 9 ~ 10
Free 50 ~ 80 6 ~ 10 Free 50 ~ 80 9 ~ 10
01Explanation

Made from polyester texture,
it has cut resistance and doesn't easily split or cracked when bunched or compressed.

02Technical Specification
Rope Size For Eye For Line
㎜ Width(㎜) Length(㎜) Width(㎜) Length(㎜)
Under 40 200 1000 ~ 3000 200 1000 ~ 3000
40 ~ 50 250 250
50 ~ 60 300 300
60 ~ 70 350 350
70 ~ 80 400 400
80 ~ 90 450 450
90 ~ 100 500 500
100 ~ 110 550 550
01Explanation

Extending the service life of rope defines performance.
Longer life rope's key factor is the prevention of external abrasion and its heat from friction.
The Saemah Super Protector is made of aramid fiber, and its excellent abrasion resistance and heat resistance greatly extend the life of the rope.

Comparision Table(Polyester VS Aramid)
Subject P-Aramid Polyester
Breaking Tenacity 23.5 g/d 9.3 g/d
Breaking Elongation 3.1% 14.6%
Specific Density 1.44 1.38
Melting Point 427 ~ 482°C 256°C
01Explanation

HMPE Rope Protector is made from a UHMWPE fibers. HMPE Rope Protector has been designed mainly for the protection of Mooring lines against external abrasion in areas such as chocks, bitts etc.
This Rope Protector is highly wear and abrasion resistant and will substantially extend the service life of an Mooring line.

02Technical Specification
  • ㆍ Dyneema Grade : SK 62
  • ㆍ Tensile Strength[GPa] : 2.8
  • ㆍ Modulus [GPa] : 92
  • ㆍ Elongation to Break[%] : 3.5
  • ㆍ Melting Point : 150℃
  • ㆍ Density : 970kg/㎥
  • ㆍ Water Absorption :0%
  • ㆍ Boiling Water Shrinkage : ＜1%